North America Wind Turbine Pitch System Market – Industry Trends and Forecast to 2028

Market Analysis and Insights: North America Wind Turbine Pitch System Market

The North America wind turbine pitch system market is expected to gain market growth in the forecast period of 2021 to 2028. Data Bridge Market Research analyses that the market is growing with a CAGR of 3.9% in the forecast period of 2021 to 2028 and is expected to reach USD 245.60 million by 2028. Rising demand for power supply is boosting the North America wind turbine pitch system market.

The technology utilized to run and control the angle of the blades in a wind turbine is a pitch system. Electric motors and gears, or hydraulic cylinders and a power supply system, make up the majority of the system. A closed-loop drive system is used to drive the pitch system. The required pitch angle is calculated by the tain turbine controller based on a set of factors such as wind speed, generator speed, and power production. It is saved as a fixed point in the pitch system. If the actual angle does not match the setpoint, the system will send power to the electric motor or fluid to the cylinder to cause the actuator to shift the blade to the correct angle. It is the most critical safety subsystem of the wind turbine, at the same time, it is critical for optimizing power production.

The rising cost of cost of electricity with the investments in renewable energy acts as a driver in the North America wind turbine pitch system market. The intermittent nature of wind energy proves to be a challenge. However, advancements in products and technology are expected to provide opportunities for the North America wind turbine pitch system market. The high installation and maintenance cost can prove to be a restrain for the market.

North America wind turbine pitch system market report provides details of market share, new developments, and product pipeline analysis, the impact of domestic and localized market players, analyses opportunities in terms of emerging revenue pockets, changes in market regulations, product approvals, strategic decisions, product launches, geographic expansions, and technological innovations in the market. To understand the analysis and the North America wind turbine pitch system market scenario, contact Data Bridge Market Research for an Analyst Brief; our team will help you create a revenue impact solution to achieve your desired goal.

North America Wind Turbine Pitch System Market Scope and Market Size

North America wind turbine pitch system market is segmented based on product type, function, diameter size, turbine power, system type, services, and application. The growth among segments helps you analyze niche pockets of growth and strategies to approach the market and determine your core application areas and the difference in your target markets.

• On the basis of product type, the North America wind turbine pitch system market is segmented into pitch valves, pitch pumps, pitch motors, pitch servo drives, remote terminal solutions, and others. The pitch pump is further sub-segmented into an electric pitch pump and a hydraulic pitch pump. Pitch motors is further sub-segmented by number of generating poles into four poles and more than four poles. In 2021, the pitch pump is expected to dominate the North America wind turbine pitch system market as it has high durability. With the preference for hydraulic system, the pump acts as the power generator for the whole system making it an integral component.
• On the basis of function, the North America wind turbine pitch system market has been segmented into high bearing reliability, vibration control & monitoring, wind angle adjustments, condition monitoring system, and others. In 2021, the wind angle adjustments segment is anticipated to dominate as it use the right fraction of the available wind energy to get the most power output with different wind speeds.
• On the basis of diameter size, the North America wind turbine pitch system market has been segmented into less than 80 mts, more than 80 mts. In 2021, more than 80 mts segment is anticipated to dominate the market as the bigger blades can help to cover a wider area which increases the capacity of the turbine, which leads to the increase of its total potential production. The upcoming off-shore installations also require higher diameter with the higher wind speed.
• On the basis of turbine power, the North America wind turbine pitch system market has been segmented into More Than 3MW, 1MW to 3MW, and Less Than 1MW. In 2021, more than 3MW segment is expected to dominate the North America wind turbine pitch system market as it provides high yield, and with growing technology, the power increases to deliver higher power with same size.
• On the basis of services, the North America wind turbine pitch system market is segmented into field services, engineering services, technical services, measurements & data logging, aftermarket services, and others. In 2021, the field services segment is expected to dominate the North America wind turbine pitch system market; it provides on-site installations, repair, and maintenance of the turbine.
• On the basis of system type, the North America wind turbine pitch system market is segmented into an electrical pitch system and hydraulic pitch system. The electrical pitch system is further sub segmented into ultracapacitors and batteries. Hydraulic pitch system is further sub segmented into hydraulic pitch power pack, pitch cylinder, pitch accumulator and hydraulic control panel. In 2021, hydraulic pitch system segment is anticipated to dominate the market as it is simple system due to the low number of components. Also it is highly reliable in higher power turbine due to the higher force produced.
• On the basis of application, the North America wind turbine pitch system market has been segmented into off-shore turbine and on-shore turbine. Off-shore is further sub segmented by capacity into more than 3MW, 1MW to 3 MW and less than 1MW. On-shore turbine is further sub-segmented by location into transitional water (30-60m depth), deepwater (more than 60m depth) and shallow water (30m depth). In 2021, on-shore segment is expected to dominate the North America wind turbine pitch system market due to faster installation compared to off-shore.

North America Wind Turbine Pitch System Market Country Level Analysis

North America wind turbine pitch system market is analyzed, and market size information is provided by the product type, function, diameter size, turbine power, system type, services, and application as referenced above.

The countries covered in the North America wind turbine pitch system market report are U.S., Canada, and Mexico. The U.S. dominates the North America wind turbine pitch system market due to the research and technology with growing focus in renewable energy and government initiatives.

The country section of the report also provides individual market impacting factors and changes in regulation in the market domestically that impact the current and future trends of the market. Data points such as new sales, replacement sales, country demographics, regulatory acts, and import-export tariffs are some of the significant pointers used to forecast the market scenario for individual countries. Also, the presence and availability of North America brands and their challenges faced due to large or scarce competition from local and domestic brands, the impact of sales channels are considered while providing forecast analysis of the country data.

Rising demand for sustainable electricity generation is boosting the Market Growth of North America Wind Turbine Pitch System Market

North America wind turbine pitch system market also provides you with a detailed market analysis for every country's growth in a particular market. Additionally, it provides detailed information regarding the market players’ strategy and their geographical presence. The data is available for the historical period 2010 to 2019.

Competitive Landscape and North America Wind Turbine Pitch System Market Share Analysis

The North America wind turbine pitch system market competitive landscape provides details by the competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, production sites and facilities, company strengths and weaknesses, product launch, product trials pipelines, product approvals, patents, product width, and breadth, application dominance, technology lifeline curve. The above data points provided are only related to the company’s focus related to the North America wind turbine pitch system market.

The major companies which are dealing in the North America wind turbine pitch system are PARKER HANNIFIN CORP, Hydratech Industries, Nidec Industrial Solutions, Siemens, KEBA, Bosch Rexroth AG, Windurance, General Electric, ABB, OAT, Pioneer Wincon, Fritz Schur Energy A/S, Vestas, DEIF A/S, Mita-Teknik,  Eaton, Emerson Electric Co. among others in domestic players. DBMR analysts understand competitive strengths and provide competitive analysis for each competitor separately.

Many contracts and agreements are also initiated by the companies worldwide, which accelerates the North America wind turbine pitch system market.

For instances,

• In October 2021, General Electric announced the launch of its second 107-meter wind turbine blade mold at its Cherbourg factory in France. The facility will produce the offshore wind turbine blade longer than 100 meters, where GE’s Haliade-X offshore wind turbine will be used. Thus the company will be able to address the demand for offshore wind turbine blades in the market.
• In March 2020, ABB announced that they will be increasing offshore wind reliability, safety, and security to facilitate stable power transmission to the German national grid. The company will enable energy transmission from DolWin5 (Epsilon) by providing a comprehensive system for IT infrastructure, OT security, plant-wide condition monitoring, SCADA, and remote access services. Thus the company will be delivering clean and efficient power for Germany’s energy transition

SKU-66679