U.S. Non-Metallic Enclosure Market, By Material Type (Fiberglass, Polycarbonate, PVC, Polyester), Type (Junction Enclosures, Disconnect Enclosures, Operator Interface Enclosures, Environment and Climate Control Enclosures and Push Button Enclosures), Design (Standard Type and Custom Type), Mounted Type (Wall Mounted Enclosure, Floor-Mounted/Free Standing Enclosure, and Underground), Form Factor (Small Enclosure, Compact Enclosure, and Free-Size Enclosure), Capacity Range (Less than 400 cu.in and More than 400 cu.in), Place (Indoor and Outdoor), Weight (Less than 10 lbs and More than 10 lbs), Vertical (Power Generation and Distribution, Oil and Gas, Metal and Mining, Medical, Pulp and Paper, Food and Beverages, Transportation, and Others) - Industry Trends and Forecast to 2030.
U.S. Non-Metallic Enclosure Market Analysis and Size
Non-metallic enclosures refer to the protective covering or case made from non-metallic materials such as the polycarbonate, fiberglass, PVC and polyester among others for enclosing the critical electronic components. These are non-corrosive, highly durable, very light weight, easy to modify and can withstand harsh environmental weathering such as wind and rain. These enclosures are used to protect the electronic components from external human and environmental interventions.
The non-metallic enclosures provide the electrical networking components with unshielded passage of energy signals unlike metallic enclosures and this is expected to act as a driving factor for the growth of the U.S. non-metallic enclosure market. Reduced visibility to the enclosed enclosure refrains the operator from noticing the damaged components by rusting within the enclosure is expected to act as a restraining factor to the growth of the U.S. non-metallic enclosure market. The increasing application of non-metallic enclosures in the harsh environmental conditions in the renewable energy grids are expected to open up opportunities for the U.S. non-metallic enclosure market players to develop enclosures with resistance to weathering. Degradation of the fiberglass enclosures caused by UV rays in the outdoor applications is expected to act as a challenge for the manufacturers of the U.S. non-metallic enclosure market.
The U.S. non-metallic enclosure market is expected to gain market growth in the forecast period of 2023 to 2030. Data Bridge Market Research analyses that the market is growing with the CAGR of 5.8% in the forecast period of 2023 to 2030. The non-metallic enclosure market was valued at USD 486.82 million in 2022 and is expected to reach USD 738.65 million by 2030 . PVC segments is expected to dominate the Non-metallic enclosure market due its non-corrosive properties, high impact resistance and durability. Non-metallic enclosure properties such as durability, high impact resistance, high strength to weight ratio and cost effectiveness over the metallic enclosure are expected to act as driving factors for the growth of the U.S. non-metallic enclosure market
U.S. Non-Metallic Enclosure Market Scope and Segmentation
|
Report Metric
|
Details
|
|
Forecast Period
|
2023 to 2030
|
|
Base Year
|
2022
|
|
Historic Years
|
2021
|
|
Quantitative Units
|
Revenue in USD Million, Volumes in Units, Pricing in USD
|
|
Segments Covered
|
Material Type (Fiberglass, Polycarbonate, PVC, Polyester), Type (Junction Enclosures, Disconnect Enclosures, Operator Interface Enclosures, Environment and Climate Control Enclosures and Push Button Enclosures), Design (Standard Type and Custom Type), Mounted Type (Wall Mounted Enclosure, Floor-Mounted/Free Standing Enclosure and Underground), Form Factor (Small Enclosure, Compact Enclosure and Free-Size Enclosure), Capacity Range (Less than 400 cu.in and More than 400 cu.in), Place (Indoor and Outdoor), Weight (Less than 10 lbs and More than 10 lbs), Vertical (Power Generation and Distribution, Oil and Gas, Metal and Mining, Medical, Pulp and Paper, Food and Beverages, Transportation and Others)
|
|
Countries Covered
|
U.S.
|
|
Market Players Covered
|
Allied Moulded Products, Inc. (U.S.), OMEGA Engineering (a subsidiary of Spectris) (U.S.), Arlington Industries, Inc. (U.S.), Robroy Industries (U.S.), Hubbell (U.S.), Schneider Electric (France), ABB (Switzerland), Legrand SA (France), Eaton (Ireland), Emerson Electric Co. (U.S.), Polycase (U.S.), nVent (U.K.), FIBOX Enclosures (Finland)
|
|
Market Opportunities
|
|
Market Definition
Non-metallic enclosures refer to protective structures that are made from materials other than metal, such as plastic, fiberglass, or composite materials. These enclosures are designed to house and safeguard electrical components, equipment, or sensitive devices in various industrial, commercial, or residential applications. Non-metallic enclosures provide excellent insulation properties, corrosion resistance, and protection against environmental factors such as moisture, chemicals, and UV radiation. They are lightweight, durable, and often feature customizable designs, allowing for easy installation, maintenance, and modification. These enclosures are widely used in industries like telecommunications, energy, transportation, and automation, where electrical safety, reliability, and functionality are crucial.
U.S. Non-Metallic Enclosure Market Dynamics
Drivers
- Rising demand for electric enclosures
The increasing demand for electric enclosures can be attributed to several factors because the adoption of electrical equipment and components continues to grow across industries, and the need for reliable and safe housing solutions has become paramount. Electric enclosures provide protection against environmental elements, such as dust, water, and corrosive substances, ensuring the longevity and proper functioning of sensitive electrical components.
- Increasing demand for energy-efficient appliances
The surge in demand for energy-efficient appliances can be attributed to several factors because there is a growing awareness and concern about environmental sustainability and the need to reduce energy consumption. Energy-efficient appliances, such as refrigerators, air conditioners, and lighting systems, consume less electricity while delivering the same or even improved performance, resulting in lower energy bills and reduced carbon emissions.
Opportunity
- Growing demand for durable and lightweight solutions
Non-metallic enclosures are known for their durability, lightweight construction, and resistance to harsh environments. With the increasing need for reliable and long-lasting equipment protection, the demand for non-metallic enclosures is expected to rise.
Restraint/Challenge
- Impact of harsh environmental conditions on non-metallic enclosure
Reduced visibility to the enclosed enclosure refrains the operator from noticing the damaged components by rusting within the enclosure is expected to act as a restraining factor to the growth of the U.S. non-metallic enclosure market. The increasing application of non-metallic enclosures in the harsh environmental conditions in the renewable energy grids are expected to open up opportunities for the U.S. non-metallic enclosure market players to develop enclosures with resistance to weathering. Degradation of the fiberglass enclosures caused by UV rays in the outdoor applications is expected to act as a challenge for the manufacturers of the U.S. non-metallic enclosure market.
Recent Development
- In December 2020, Robroy Industries announced the development of new 3D printing technology from Robroy Enclosures. This technology helped in developing unique solutions for enclosure accessories and for demanding applications. The technology enabled the company to develop quick prototypes for the customers and helped them save time to bring the product to the market. It also enabled the company to run analysis and test functionality of the design before manufacturing. This has enhanced the company’s presence in the market.
U.S. Non-Metallic Enclosure Market Scope
The U.S. non-metallic enclosure market is segmented on the basis of material type, type, design, mounted type, capacity range, place, weight, form factor, and vertical. The growth amongst these segments will help you analyse meagre growth segments in the industries and provide the users with a valuable market overview and market insights to help them make strategic decisions for identifying core market applications.
Material Type
- Fiberglass
- Polycarbonate
- PVC
- Polyester
Type
- Junction Enclosures
- Disconnect Enclosures
- Operator Interface Enclosures
- Environment and Climate Control Enclosures
- Push Button Enclosures
Design
- Standard Type
- Custom Type
Mounted Type
- Wall Mounted Enclosure
- Floor-Mounted/Free Standing Enclosure
- Underground
Form Factor
- Small Enclosure
- Compact Enclosure
- Free-Size Enclosure
Capacity Range
- Less than 400 cu.in
- More than 400 cu.in
Place
- Indoor
- Outdoor
Weight
- Less than 10 lbs
- More than 10 lbs
Vertical
- Power Generation and Distribution
- Oil and Gas
- Metal and Mining
- Medical
- Pulp and Paper
- Food and Beverages
- Transportation
- Others
U.S. Non-Metallic Enclosure Market Regional Analysis/Insights
U.S. non-metallic enclosure market is analysed and market size insights and trends are provided by country, type, type, design, mounted type, capacity range, place, weight, form factor and vertical as referenced above.
The country covered in the U.S. non-metallic enclosure market report is U.S..
The country section of the report also provides individual market-impacting factors and changes in regulation in the market domestically that impact the current and future trends of the market. Data points like downstream and upstream value chain analysis, technical trends, and Porter’s five forces analysis, case studies are some of the pointers used to forecast the market scenario for individual countries. Also, the presence and availability of Europe brands and the challenges faced due to large or scarce competition from local and domestic brands, the impact of domestic tariffs, and trade routes are considered while providing forecast analysis of the country data.
Competitive Landscape and U.S. Non-Metallic Enclosure Market Share Analysis
The U.S. non-metallic enclosure market competitive landscape provides details of competitors. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, Europe presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, and application dominance. The above data points provided are only related to the companies' focus related to the U.S. non-metallic enclosure market.
Some of the major players operating in the U.S. non-metallic enclosure market are:
- Allied Moulded Products, Inc. (U.S.)
- OMEGA Engineering (a subsidiary of Spectris) (U.S.)
- Arlington Industries, Inc. (U.S.)
- Robroy Industries (U.S.)
- Hubbell (U.S.)
- Schneider Electric (France)
- ABB (Switzerland)
- Legrand SA (France)
- Eaton (Ireland)
- Emerson Electric Co. (U.S.)
- Polycase (U.S.)
- nVent (U.K.)
- FIBOX Enclosures (Finland)
SKU-